NCP1050P44
| Parameters | |
|---|---|
| Quiescent Current | 450μA |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Frequency | 44kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1050 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
NCP1050P44 Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.In Tube case, the ac dc converter is available.There is a mounting point for this AC/DC converter in the way of Through Hole .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.The voltage range of the supply can be set to 7.5V~10V (Vcc/Vdd).In total, there are 8 terminations.The pins of the ac-dc converter count up to 8 .If you select the NCP1050 family, you will be able to search for similar acdc converters.There are 1 outputs to be run.The ac to dc conversions are included in Switching Regulator or Controllers .AC to DC converter reaches high efficiency when operated at a frequency of 44kHz .Based on a unique technique, the input voltage can be ensured to have the maximal value of 8.5V .It is possible to supply the ac to dc inverter with a maximum current of 2A .Quiescent current is consumed at 450μA .
NCP1050P44 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
NCP1050P44 Applications
There are a lot of ON Semiconductor NCP1050P44 AC DC Converters applications.
- USB-PD 2.0
- Linear Adapter Replacements
- IoT Applications
- Chargers for cell/cordless phones
- 3.3V power supplies
- Standby Power for General Off-Line Applications
- AC?DC USB chargers for Cell Phones
- AC--DC Adapter
- Networking
- Home Appliance Applications