NCP1050P136
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Frequency | 136kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1050 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Quiescent Current | 450μA |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1050P136 Overview
In the 8-DIP (0.300, 7.62mm), 7 Leads package, the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.Through Hole is mounted in the way of this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .In this AC DC converter, the analog IC type is SWITCHING REGULATOR .The voltage range of the supply can be set to 7.5V~10V (Vcc/Vdd).There are a total of 8 terminations in it.In this ac/dc converter, there are 8 pins.There are 8 pins on the ac-dc converter.It is possible to search for similar acdc converters by using the NCP1050 family.AC to DC converter is necessary to run 1 outputs.Switching Regulator or Controllers includes the ac to dc conversions.This power AC DC is capable of reaching high efficiency when operating at a frequency of 136kHz .It is possible to supply the ac to dc inverter with a maximum current of 2A .The system consumes quiescent current at 450μA .
NCP1050P136 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
NCP1050P136 Applications
There are a lot of ON Semiconductor NCP1050P136 AC DC Converters applications.
- Battery chargers for cellular phones
- Remotely-controlled appliances
- Standby power supplies for TV
- Set-top boxes
- Portable audio
- AC-DC Output Power Conversion Applications
- Battery Chargers
- Lighting controls
- Power tools fast chargers with trickle and on/off
- Battery chargers for cordless