NCP1050P100
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1050 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Quiescent Current | 450μA |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1050P100 Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .In Tube AC/DC power converter, it is available.This AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .This AC/DC converter is designed for use within the range of 7.5V~10V supply voltage (Vcc/Vdd).There are a total of 8 terminations in it.The pins of the ac-dc converter total to 8 .The NCP1050 family can be used to search for similar acdc converters.Running 1 outputs is available.Switching Regulator or Controllers includes the ac to dc conversions.AC to DC converter is able to reach high efficiency when its frequency is 100kHz .Using a unique technique, it is possible to ensure an input voltage with a maximum value of 8.5V .It is possible to supply the ac to dc inverter with a maximum current of 2A .AC to DC converter consumes quiescent current at 450μA .
NCP1050P100 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
NCP1050P100 Applications
There are a lot of ON Semiconductor NCP1050P100 AC DC Converters applications.
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Low-Voltage I/O System Power
- Battery Chargers
- White goods
- Battery chargers for cellular phones
- Consumer electronics
- Replaces linear transformers
- Replacements for bulky plug-in transformers
- Adapter for ADSL
- Adapter/Charger for Cordless Phones