NCP1010ST100T3
| Parameters | |
|---|---|
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1010 |
| Pin Count | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 10V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.55A |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height Seated (Max) | 1.75mm |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
NCP1010ST100T3 Overview
This ac to dc converter is included in the package TO-261-4, TO-261AA .It is available in Tape & Reel (TR) AC/DC power converter.In this case, the AC/DC converter is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .Switching frequency reaches 100kHz Hz.Vcc/Vdd can be used within the range of 8.5V~10V supply voltage.As a result, it has a total of 4 terminations.There are 4 pins on the ac/dc converter.The ac-dc converter has 4 pins.Similar acdc converters can be found using the NCP1010 family.AC to DC converter is contained in Switching Regulator or Controllers .Ac to dc inverters can be supplied with a maximum current of 0.55A .It is possible for the interface IC to conduct when the supply voltage is 10V .
NCP1010ST100T3 Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 100kHz
With 4 pins
Operating Supply Voltage at the range of 10V
NCP1010ST100T3 Applications
There are a lot of ON Semiconductor NCP1010ST100T3 AC DC Converters applications.
- White goods
- Vacuum Cleaner
- Wireless System
- Home Appliance Applications
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- White goods
- Auxiliary Power Supply
- Small off-line low voltage power supplies
- PDAs
- MP3