NC7SB3157L6X
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Weight | 30g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 7SB3157 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Power Dissipation | 180mW |
| Max Supply Current | 1μA |
| Throw Configuration | SPDT, SPST |
| Turn On Delay Time | 23 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 2 |
| Supply Type | Single |
| Turn-Off Delay Time | 12.5 ns |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 15Ohm |
| High Level Output Current | 128mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 57 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 6.5pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 5.2ns, 3.5ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -54dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 7ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 450μm |
| Length | 1.45mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NC7SB3157L6X Overview
This electronic part is conveniently packaged in 6-UFDFN, making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. A total of 6 terminations have been recorded. A 1 channel electronic part produces high-quality output. When the electronic component is given a voltage of 2.3V, it should be turned on and run. A SPDT switching circuit is used to build these analog multiplexers. A 1 circuit is present in this switch device. 7SB3157 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 15Ohm. For functions related to 6 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Single supply type. In order for the electronic part to function properly, the lowest voltage should be 1.65V. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~5.5V. It may damage the digital multiplexer if the voltage is higher than 1μA. Operating the 2 inputs requires 2 inputs.
NC7SB3157L6X Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 250MHz
NC7SB3157L6X Applications
There are a lot of ON Semiconductor NC7SB3157L6X Analog Switches & Multiplexers ICs applications.
- High reliability control systems
- Industrial control systems
- Private Branch Exchange (PBX)
- Avionics test equipment
- New designs requiring multiplexer functions
- PBXs
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- DVD-R
- Isolation
- Communications systems