MUX508IPW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Resistance | 170Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MUX508 |
| Output | COMMON OUTPUT |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Input Voltage (Min) | -5V |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Bandwidth | 500MHz |
| Supply Current-Max (Isup) | 0.062mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 170Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.4pF 7.5pF |
| On-state Resistance Match-Nom | 2.4Ohm |
| Switch Time (Ton, Toff) (Max) | 136ns, 75ns |
| Charge Injection | 0.3pC |
| Channel-to-Channel Matching (ΔRon) | 2.4 Ω |
| Crosstalk | -96dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 90ns |
| Normal Position | NC |
| Signal Current-Max | 0.03A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MUX508IPW Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tube. In Surface Mount, this analog switch is mounted. There is 8:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there have been 16 terminations. By its 1 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. 1 circuits are used in this analogue multiplexer. Try searching with MUX508 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 170Ohm. The functions of 16 pins can be found in the datasheets. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. A total of COMMON OUTPUT outputs are available on this analog switch ic. It is possible to transfer data over a 500MHz-bandwidth.
MUX508IPW Features
1 Channels
Bandwidth: 500MHz
MUX508IPW Applications
There are a lot of Texas Instruments MUX508IPW Analog Switches & Multiplexers ICs applications.
- CSU
- Private Branch Exchange (PBX)
- Isolation
- Battery Powered Systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Relay Replacement
- DVD-R
- Residential Gateways, Home Gateway/Router
- Multi-Line E1 Interface Cards