MUX36S08IPWR
| Parameters | |
|---|---|
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Input Voltage (Min) | -5V |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Bandwidth | 500MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 170Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 40pA |
| Channel Capacitance (CS(off), CD(off)) | 2.4pF 7.5pF |
| On-state Resistance Match-Nom | 2.4Ohm |
| Switch Time (Ton, Toff) (Max) | 136ns, 75ns |
| Charge Injection | 0.3pC |
| Channel-to-Channel Matching (ΔRon) | 2.4 Ω |
| Crosstalk | -96dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 90ns |
| Normal Position | NO |
| Signal Current-Max | 0.0003A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 170Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | 36S08 |
| Output | COMMON OUTPUT |
| Number of Channels | 2 |
| Number of Circuits | 1 |
MUX36S08IPWR Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Operation at a temperature around -40°C~125°C TA. A total of 16 terminations have been recorded. As a result of its 2 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. A 1 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with 36S08. A 170Ohm internal resistance characterizes this multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. A total of COMMON OUTPUT outputs are available on this analog switch ic. 500MHz bandwidths enable data to be transferred.
MUX36S08IPWR Features
2 Channels
Bandwidth: 500MHz
MUX36S08IPWR Applications
There are a lot of Texas Instruments MUX36S08IPWR Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Microwave transmission systems
- High speed data transmission line cards
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Cellular phones
- Precision test equipment
- Remote Powered Equipment
- Signal routing between systems
- Modems
- Microprocessor controlled systems