MSP430F2618TPN
| Parameters | |
|---|---|
| Series | MSP430F2xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 16MHz |
| Pin Count | 80 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3.3V |
| Interface | I2C, IrDA, LIN, SCI, SPI, UART, USART |
| Memory Size | 116kB |
| Oscillator Type | Internal |
| Number of I/O | 64 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 12 |
| Core Processor | MSP430 |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 116KB 116K x 8 + 256B |
| Connectivity | I2C, IrDA, LINbus, SCI, SPI, UART/USART |
| Supply Current-Max | 0.595mA |
| Bit Size | 16 |
| Data Converter | A/D 8x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Density | 928 kb |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of A/D Converters | 8 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 8 |
| Number of UART Channels | 2 |
| Number of Serial I/Os | 2 |
| Number of Timers | 10 |
| Number of GPIO | 48 |
| Number of SPI Channels | 4 |
| Height | 1.6mm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Surface Mount | YES |
| Number of Pins | 80 |
| Weight | 465.697616mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
MSP430F2618TPN Overview
It is available in the 80-LQFP package for the benefit of saving space. This is mounted using the Surface Mount method. It comes in the package?of a Tray. With a processor of MSP430 cores, the device is powered. During work, the temperature should remain at -40°C~105°C TA. The type of memory in which this program is stored is FLASH. The device has 64 I/Os. QUAD is the location of its terminals. This circuit consists of 80 terminationals. There are a number of electrical components in the MSP430F2xx series, including this one. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. 80 pins are used to construct it. Total number of pins is 80. It falls under the category of Microcontrollers. In order to store data and programs, the devices have a memory size of 116kB. It is important to note that the maximum supply current is 0.595mA. It is highly efficient when it works at a frequency of 16MHz. A supply voltage (Vsup) above 3.3V is necessary for normal operation. Using an oscillator type Internal, it operates.
MSP430F2618TPN Features
80-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
MSP430F2618TPN Applications
There are a lot of Texas Instruments MSP430F2618TPN Microcontroller applications.
- Medical instruments chromatographs
- Accu-check
- Fire alarms
- Home appliances
- Set-top boxes
- Fax machines
- Switches
- Calculator
- Hand-held metering systems
- Security systems