MSP430F2131TDWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | MSP430F2xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 16MHz |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 3.3V |
| Interface | UART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MSP430 |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 8KB 8K x 8 + 256B |
| Bit Size | 16 |
| Data Converter | Slope A/D |
| Watchdog Timer | Yes |
| Access Time | 16 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of Programmable I/O | 16 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (bytes) | 256 |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430F2131TDWR Overview
It is available in the 20-SOIC (0.295, 7.50mm Width) package for the benefit of saving space. A Surface Mount mounting method is used. A package of Tape & Reel (TR) contains it. A MSP430 core processor powers the device. When working, it is recommended that the temperature be kept at -40°C~105°C TA. The type of memory in which this program is stored is FLASH. 16 I/Os are present on the device. The terminals are positioned at DUAL. 20 terminationals are present. There are a number of electrical components in the MSP430F2xx series, including this one. By using a 3.3V voltage supply, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A total of 20 pins are used in its construction. There are a total of 20 pins on it. It falls under the category of Microcontrollers. Using the devices' 8kB memory size, you can store programs and data. There is a source of power of 2/3.3V that powers this device. It is highly efficient when it works at a frequency of 16MHz. A total of 1 timers/counters have been set up. The number 16 represents the number of programmable I/O ports on the board. During normal operation, the supply voltage (Vsup) should be kept above 3.3V. An oscillator of type Internal is used.
MSP430F2131TDWR Features
20-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
MSP430F2131TDWR Applications
There are a lot of Texas Instruments MSP430F2131TDWR Microcontroller applications.
- Firewalls
- Mobile computers
- Fire alarms
- Embedded gateways
- Mice
- Fax machines
- DDC control
- Safety -airbags, automatic braking system (ABS)
- Digital set-top boxes
- DCS control intelligent sensor