MM74HC164M
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 150mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 4.5V |
| Frequency | 50MHz |
| Base Part Number | 74HC164 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 35 ns |
| Turn On Delay Time | 35 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Number of Inputs | 2 |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Gates | 1 |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Input Current | 1μA |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HC164M Overview
14-SOIC (0.154, 3.90mm Width) package contains the device. Chip terminations add up to 14. It is used to pack in Tube case. Its operating supply voltage is rated at 4.5V. 14 pins are located on the device. The recommended mounting method is Surface Mount. There is an electronic component in the HC/UH. Mounting of this component is indicated by Surface Mount. Operating temperatures are within the range of -40°C~85°C. Voltages within 2V~6V are supplied to the device. In the 74HC series, this electrical component is found. Similar parts can be found by searching for the 74HC164 family. There should be no voltage less than 2V at the minimum supply voltage (Vsup). Ideally, the maximum supply voltage (Vsup) should not exceed 6V. Its frequency is set to 50MHz.
MM74HC164M Features
With 14 pins
Mounted in Surface Mount type.
Based on 74HC164 family
MM74HC164M Applications
There are a lot of ON Semiconductor MM74HC164M Shift Registers applications.
- Pseudo Random Pattern Generator
- data transfer
- Remote control holding register
- Data Processors
- Delay Line
- Generate time delay toward digital circuits
- Data Format Converters
- 8-bit data storage
- ROM Chips
- store data in digital form