MM74C74MX
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 14-SOIC |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | 74C |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 3V~15V |
| Base Part Number | 74C74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Clock Frequency | 8MHz |
| Current - Quiescent (Iq) | 60μA |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 110ns @ 10V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
MM74C74MX Overview
The flip flop is packaged in a case of 14-SOIC (0.154, 3.90mm Width). The package Tape & Reel (TR)contains it. In the configuration, Differentialis used as the output. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. Powered by a 3V~15Vvolt supply, it operates as follows. In this case, the operating temperature is -55°C~125°C TA. D-Typeis the type of this D latch. It belongs to the 74Cseries of FPGAs. You should not exceed 8MHzin its output frequency. D latch consists of 2 elements. As a result, it consumes 60μA of quiescent current without being affected by external factors. JK flip flop belongs to 74C74 family. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded.
MM74C74MX Features
Tape & Reel (TR) package
74C series
MM74C74MX Applications
There are a lot of ON Semiconductor MM74C74MX Flip Flops applications.
- Patented noise
- CMOS Process
- Computers
- ESD protection
- Safety Clamp
- Modulo – n – counter
- Buffer registers
- QML qualified product
- Data storage
- Test & Measurement