MLP1N06CL
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Surface Mount | NO |
| Number of Pins | 3 |
| Transistor Element Material | SILICON |
| Operating Temperature | -50°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Series | SMARTDISCRETES™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Additional Feature | LOGIC LEVEL COMPATIBLE |
| Voltage - Rated DC | 62V |
| Peak Reflow Temperature (Cel) | 240 |
| Reach Compliance Code | not_compliant |
| Current Rating | 1A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MLP1N06 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 40W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Case Connection | DRAIN |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Transistor Application | SWITCHING |
| Rise Time | 4ns |
| Fall Time (Typ) | 3 ns |
| Turn-Off Delay Time | 4 ns |
| Continuous Drain Current (ID) | 1A |
| Ratio - Input:Output | 1:1 |
| JEDEC-95 Code | TO-220AB |
| Gate to Source Voltage (Vgs) | 10V |
| Voltage - Load | 59V Max |
| Drain Current-Max (Abs) (ID) | 2.75A |
| Drain to Source Breakdown Voltage | 59V |
| Avalanche Energy Rating (Eas) | 80 mJ |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 590m Ω |
| Drain to Source Resistance | 750mOhm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MLP1N06CL Overview
A Tube is used to package it.This package is included in TO-220-3.A Through Hole mounting is used for the LED driving board.The switch type of this switch is General Purpose.It is best to set the temperature to -50°C~150°C TJ to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts.It comes under the family of MLP1N06.It contains 3 terminations.The 3 pins are used for the operation of the system.A total of 3 pins are included in this LED driver.It is part of the SMARTDISCRETES? series.LOGIC LEVEL COMPATIBLE can also be produced by using this LED driver.Total, there are 1 elements.SWITCHING transistors are used in the lighting driver.
MLP1N06CL Features
Additional features like LOGIC LEVEL COMPATIBLE
Transistor applications such as SWITCHING
MLP1N06CL Applications
There are a lot of ON Semiconductor MLP1N06CL Power Switches ICs applications.
- Hard Disk Drives
- Portable Music Players
- Smart Phones, Feature Phones
- Portable Devices
- Notebook and Tablet Computers
- Solid State Drivers
- Various applications equipped with buttons
- PC Cards
- Wireless Headsets
- Portable GPS