MIC4428YM-TR
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~18V |
| Base Part Number | MIC4428 |
| Number of Outputs | 2 |
| Output Voltage | 25mV |
| Max Output Current | 1.5A |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 1.5mA |
| Output Current | 1.5A |
| Propagation Delay | 50 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 20 ns |
| Turn-Off Delay Time | 40 ns |
| Rise / Fall Time (Typ) | 20ns 29ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 1.48mm |
| Length | 4.93mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4428YM-TR Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Gate drivers is packaged in the way of Tape & Reel (TR).There are 2 drivers installed for this device.The device is mounted in the direction of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.This gate type has a N-Channel, P-Channel MOSFET design.-40°C~150°C TJ is the allowed temperature range for this device.Mosfet driver accepts input of type Inverting, Non-Inverting.Under its base part number MIC4428, various related parts can be found.The device is mounted using Surface Mount.The pins are configured with 8 when designing the chip.An output current as high as 1.5A can be achieved at maximum power.Based on its basis, it integrates 2 outputs.Mosfet gate drivers supports a current output of 1.5A.There is a maximum acceptable operating temperature of 85°C.There is a minimum operating temperature of -40°C.When the supply voltage is 18V, it is at its maximum operation.In order for it to operate, the supply voltage of 4.5V must be maintained.In this case, it produces a voltage of 25mV.
MIC4428YM-TR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
MIC4428YM-TR Applications
There are a lot of Microchip Technology MIC4428YM-TR gate drivers applications.
- White Goods - Air Conditioner, Washing Machine,
- Isolated Supplies for Motor Control
- A/D drivers
- Industrial Power Supplies
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Commercial and agricultural vehicles (CAV)
- General Purpose 3-Phase Inverter
- DC/DC converters
- Refrigerator
- 3-Phase Motor Inverter Driver