MIC4422YN
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 960mW |
| Technology | BCDMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MIC4422 |
| Number of Outputs | 1 |
| Output Voltage | 25mV |
| Max Output Current | 9A |
| Voltage | 20V |
| Nominal Supply Current | 450μA |
| Power Dissipation | 960mW |
| Output Current | 9A |
| Propagation Delay | 60 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 75ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 15 ns |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 20ns 24ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Length | 9.525mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4422YN Overview
For greater flexibility, the 8-DIP (0.300, 7.62mm) package is adopted.Gate drivers is packaged in the way of Tube.Ideally, it should be mounted in the direction of Through Hole.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.IGBT, N-Channel MOSFET is the gate type used for this design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Mosfet driver accepts input of type Non-Inverting.The configuration starts with 8 terminations.There are various related parts under its base part number MIC4422.In this case, Through Hole indicates how the device is to be mounted.As a result, it is configured with 8 pins when it is designed.A supply voltage of 18V is required for operation.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.There is a maximum output current of 9A.For its basis, 1 outputs are integrated.The output current of this device can be set to 9A.According to its maximum power dissipation, 960mW is capable of conducting and transferring a large amount of power without overheating.In this case, the voltage output is 25mV.Mosfet gate drivers receives an input of STANDARD.
MIC4422YN Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 960mW
MIC4422YN Applications
There are a lot of Microchip Technology MIC4422YN gate drivers applications.
- Isolated Supplies for Motor Control
- Smart Phones
- Commercial and agricultural vehicles (CAV)
- DC/DC converters
- A/D drivers
- Industrial motor drives - compact, standard, premium, servo drives
- Commercial air-conditioning (CAC)
- High-voltage isolated DC-DC converters
- Head-up and Head mounted displays
- High frequency line drivers