MIC4123YML-TR
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BCDMOS |
| Voltage - Supply | 4.5V~20V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MIC4123 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Propagation Delay | 75 ns |
| Supply Current-Max | 3.5mA |
| Input Type | Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 11ns 11ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 0.9mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
MIC4123YML-TR Overview
The 8-VDFN Exposed Pad package provides greater flexibility.Tape & Reel (TR) represents the package.There are 2 drivers installed for this device.Its recommended mounting way is Surface Mount.In the absence of a power supply voltage of 4.5V~20V V, it is able to demonstrate its superiority.This gate type has a N-Channel, P-Channel MOSFET design.-40°C~125°C TJ is the allowed temperature range for this device.Input type of Inverting is used.It's configured with 8 terminations.Under its base part number MIC4123, various related parts can be found.Surface Mount is the way it takes to mount the device.At the time of design, it is configured with 8 pins.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 3A.Mosfet driver ic is not possible to exceed 3.5mA when the supply current is being supplied.
MIC4123YML-TR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
MIC4123YML-TR Applications
There are a lot of Microchip Technology MIC4123YML-TR gate drivers applications.
- Industrial Power Supplies
- Solar power supplies
- Uninterruptible Power Supplies (UPS)
- LCD/LCoS/DLP portable and embedded pico projectors
- Motor Controls
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- AC-DC Inverters
- General Purpose 3-Phase Inverter
- Portable Media Players
- High power buffers