MIC2583R-JYQS
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-QSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| Feature | Auto Retry |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Hot Swap Controller |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | General Purpose |
| Voltage - Supply | 2.3V~13.2V |
| Depth | 3.91mm |
| Base Part Number | MIC2583 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 2.5mA |
| Current - Supply | 1.5mA |
| Internal Switch(s) | No |
| Programmable Features | Fault Timeout, Slew Rate, UVLO |
| Feature Pins | CFILTER, CPOR, DIS, /FAULT, FB, ON, /POR, PWRGD |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2583R-JYQS Overview
The 16-SSOP (0.154, 3.90mm Width) package includes it.As of now, 1 channels are available.The package resembles a Tube.As Surface Mount would say, it's set up like that.Electric components of this type are classified as Hot Swap Controller.Ensure reliable operation by setting the temperature to -40°C~85°C.General Purpose applications can be downloaded from the device.In Auto Retry, it is featured.In theory, it should work as long as the power source has a 2.3V~13.2VV input.Hot-swappable device belongs to the MIC2583 family of numbers.This device uses 16 pins for operation.Hot-swappable device has Fault Timeout, Slew Rate, UVLO programmable features.Currently, 1.5mA is in short supply.There is a Surface Mount axis pointing in the direction of the object.For stable operation, the maximum operating temperature should be 85°C°C.To maintain reliability, it functions at a minimum working temperature of -40°C degrees Celsius.Hot Swap is set by default to output 1.13.2VV is the maximum supply voltage it can handle.Using a low supply voltage, such as 2.3VV, will be feasible.Currently, 1.5mA is the supply current.There is a maximum current requirement of 2.5mA for it to operate.
MIC2583R-JYQS Features
Features of Auto Retry
Programmable features of Fault Timeout, Slew Rate, UVLO
MIC2583R-JYQS Applications
There are a lot of Microchip Technology MIC2583R-JYQS hot swap controllers applications.
- Active current limit
- Firewire
- Board or blade insertion into live backplanes
- Automatic restart after load failure
- Loads
- Industrial computers and servers
- Thermal limitation
- Supply voltage monitoring
- CompactPCI
- Disconnect faulty loads before supply voltage drops