MIC2563A-0BSM
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Supplier Device Package | 28-SSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Base Part Number | MIC2563A |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Interface | Logic |
| Current - Output (Max) | 200mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | PCMCIA Switch |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 1.8Ohm |
| RoHS Status | Non-RoHS Compliant |
MIC2563A-0BSM Overview
It is package in Tube case.This package is included in 28-SSOP (0.209, 5.30mm Width).A Surface Mount mounting is used for the LED driving board.The switch type is PCMCIA Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.By default, it is set to output 4.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It is part of the MIC2563A family of LED drivers.200mAV is the maximum output of the LED driver.
MIC2563A-0BSM Features
MIC2563A-0BSM Applications
There are a lot of Microchip Technology MIC2563A-0BSM Power Switches ICs applications.
- Hot Swap
- Low Voltage I/O System Power
- Smartphone and PDA
- Wireless Headsets
- USB Power Distribution
- PC Card Hot Swap
- PC Cards
- Portable GPS
- Telecom and Network Systems
- HDD, SSD