MIC2549A-2BN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Current - Output (Max) | 3A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Turn On Time | 5000 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 35m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| Length | 9.525mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MIC2549A-2BN Overview
It is package in Tube case.It is included in the package 8-DIP (0.300, 7.62mm).In this case, the LED driving board is mounted as Through Hole.The switch type is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.To operate, it needs a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.As a result, there are 8 terminations.It is important to note that the LED driving board has 1 functions.The maximum output of the LED driving board is 3AV.It is possible to obtain high efficiency with a supply voltage of 5V.The LED driving board is equipped with a total of 8 pins.In this case, Vsup (maximum supply voltage) is set to 5.5V.Normal operation requires a voltage above 2.7V for the supply voltage.
MIC2549A-2BN Features
Supplied from 5V
MIC2549A-2BN Applications
There are a lot of Rochester Electronics, LLC MIC2549A-2BN Power Switches ICs applications.
- Portable GPS
- Smart Phones, Feature Phones
- Hot Swap
- Portable/Handheld Devices
- Portable Devices
- Notebook PC
- Gaming
- PC Cards
- HDD, SSD
- USB Ports/Hubs