MIC2548-1YMM
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 120mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2548 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 1.5A |
| Nominal Supply Current | 75μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 22 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 80mOhm |
| Height | 900μm |
| Length | 3.1mm |
| Width | 3.05mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2548-1YMM Overview
As a result, it is packaged in the form of a Tube.There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package that includes it.The mounting type of the LED driver is Surface Mount.There is a switch type of USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.By default, it is set to output 1.The LED driving board operates at Not Required volts.The maximum output voltage is N-Channel volts.As far as features are concerned, the LED driving board has Status Flag.This object belongs to the MIC2548 family.The operation is performed through the 8 pins.From the lighting driver, there is a maximum output of 1.5AV.This operation requires the maximum output current to be decreased to 1.5A.In this case, it is mounted in the way of Surface Mount.It has a resistance of 120mOhm.We offer 1 channels in total.As far as input voltage goes, its maximum is 5.5V volts.The minimum input voltage is 2.7V volts.For stable operation, the maximum operating temperature is 85°C°C.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.It can handle a maximum voltage of 5.5VV.You can also run it at 2.7V volts if required.
MIC2548-1YMM Features
Resistance of 120mOhm
1 channels
MIC2548-1YMM Applications
There are a lot of Microchip Technology MIC2548-1YMM Power Switches ICs applications.
- USB Ports/Hubs
- Hot Swaps
- Wireless/Networking Cards
- Set-Top Boxes
- Hard Disk Drives
- Gaming
- Set-top-box
- Wireless Modem Data Cards
- Solid-State Drives
- Wearable Devices