MIC2546-1BTS
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Number of Outputs | 2 |
| Qualification Status | COMMERCIAL |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 1.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Turn On Time | 5000 µs |
| Output Peak Current Limit-Nom | 0.1A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
MIC2546-1BTS Overview
A Tube is used to package it.There is a 16-TSSOP (0.173, 4.40mm Width) package that includes it.The LED driver is mounted as Surface Mount.USB Switch is the switch type that it owns.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver has a total of 2 outputs.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.It consists of 16 terminations in total.It contains 2 functions.In this case, the LED driving board can produce only 1.5AV as its maximum output.High efficiency is possible at 5V supply voltage.As a result, it has a total of 16 pins.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).
MIC2546-1BTS Features
Supplied from 5V
MIC2546-1BTS Applications
There are a lot of Rochester Electronics, LLC MIC2546-1BTS Power Switches ICs applications.
- Various applications equipped with buttons
- Gaming
- Wireless/Networking Cards
- USB Power Distribution
- Smartphone and PDA
- Wireless Modem Data Cards
- Hard Disk Drives
- USB3.1 Power Delivery
- Wireless Headsets
- Hot-Swap Systems