MIC2506YM-TR
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 135MOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1A |
| Base Part Number | MIC2506 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Interface | On/Off |
| Max Supply Voltage | 7.5V |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 7.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~7.5V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Rds On (Typ) | 75mOhm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2506YM-TR Overview
A Tape & Reel (TR) is used to package it.It's included in the 8-SOIC (0.154, 3.90mm Width) package.This lighting drivere has a mounting type of Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable operation, set the temperature to -40°C~85°C TA.It is possible to use 2 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.A lighting driver with Slew Rate Controlled, Status Flag features is available.As you can see, it comes from the MIC2506 family.In order to operate, the 8 pins are used.From the lighting driver, there is a maximum output of 1AV.The maximum output current is reduced to 1A to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount.There is 135MOhm resistance on the LED driver.In order to ensure stable operation, a maximum operating temperature of 85°C°C should be maintained.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.It can handle a voltage of 7.5VV as its maximum supply voltage.
MIC2506YM-TR Features
Resistance of 135MOhm
MIC2506YM-TR Applications
There are a lot of Microchip Technology MIC2506YM-TR Power Switches ICs applications.
- USB Protection
- Wireless Modem Data Cards
- Mobile Communication Devices
- Solid-State Drives
- Hot Swap
- Hard Disk Drives
- Various applications equipped with buttons
- Set-Top Boxes
- Storage Drives
- Wearable Devices