MIC2026A-1YM
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 100mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2026 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Number of Channels | 2 |
| Voltage | 5.5V |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 5μA |
| Current | 1.25A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 100mOhm |
| Height | 1.48mm |
| Length | 4.93mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2026A-1YM Overview
It is packaged in the form of a Tube.Package 8-SOIC (0.154, 3.90mm Width) contains it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The lighting driver is equipped with 2 outputs that can be used.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.A lighting driver with Slew Rate Controlled, Status Flag features is available.It is a member of the MIC2026 family.For operation, 8 pins are used.There is a maximum output of 500mAV from the LED driver.Maximum output current falls to 500mA when operation criteria are met.The lighting driver is mounted in the direction of Surface Mount.It has a resistance of 100mOhm.To choose from, there are 2 channels.It is designed to be stable at 85°C°C, which is the maximum operating temperature.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.In addition to 5.5VV, it can handle other voltages as well.If required, it can operate at 2.7V volts as well.
MIC2026A-1YM Features
Resistance of 100mOhm
2 channels
MIC2026A-1YM Applications
There are a lot of Microchip Technology MIC2026A-1YM Power Switches ICs applications.
- USB3.1 Power Delivery
- Portable Devices
- USB Power Distribution
- Portable GPS Device
- Hot Swap
- USB Power Distribution
- PC Card Hot Swap
- Smartphone and PDA
- Smart Phones, Feature Phones
- Mobile Communication Devices