MIC2026-1BN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Supplier Device Package | 8-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Base Part Number | MIC2026 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Interface | On/Off |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 90mOhm |
| RoHS Status | Non-RoHS Compliant |
MIC2026-1BN Overview
It is package in Tube case.The 8-DIP (0.300, 7.62mm) package contains it.Through Hole is the mounting type of the LED driver.There is a switch type of General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.There is a default setting of 2 for output.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is N-Channel volts.It is equipped with Slew Rate Controlled, Status Flag features.As you can see, it comes from the MIC2026 family.In terms of output, the lighting driver can provide a maximum of 500mA V.
MIC2026-1BN Features
MIC2026-1BN Applications
There are a lot of Microchip Technology MIC2026-1BN Power Switches ICs applications.
- Hard Disk Drives
- Portable Devices
- Set-top-box
- Hot-Swap Systems
- Notebook PC
- HDD, SSD
- USB Protection
- PDAs
- Low Voltage I/O System Power
- Hot Swap