MIC2013-1.2YM5
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Supplier Device Package | SOT-23-5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Base Part Number | MIC2013 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Interface | On/Off |
| Current - Output (Max) | 1.2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 70mOhm |
| RoHS Status | ROHS3 Compliant |
MIC2013-1.2YM5 Overview
The LED driver's packaged as a Tube.There is a package for it in the SC-74A, SOT-753 package.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The lighting driver is equipped with 1 outputs that can be used.A supply voltage of Not Required is required for it to operate.A maximum output voltage of P-Channel volts can be obtained with this LED driver.The MIC2013 family consists of this type.The lighting driver's maximum output is 1.2AV.
MIC2013-1.2YM5 Features
MIC2013-1.2YM5 Applications
There are a lot of Microchip Technology MIC2013-1.2YM5 Power Switches ICs applications.
- Wireless Modem Data Cards
- USB Protection
- Various applications equipped with buttons
- Wearable Devices
- Solid-State Drives
- Low Voltage I/O System Power
- HDD, SSD
- Portable Video Game Players
- USB Power Distribution
- Hot Swap