MIC2005A-1YM5-TR
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Supplier Device Package | SOT-23-5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 170mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 500mA |
| Base Part Number | MIC2005A |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 300μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 170mOhm |
| Height | 1.3mm |
| Length | 2.9mm |
| Width | 1.75mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2005A-1YM5-TR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the SC-74A, SOT-753 package as well.The lighting driver has the mounting type Surface Mount.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.As a default, the output is set to 1.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of P-Channel volts has been specified.The MIC2005A family consists of this type.For operation, we use the 5 pins.This lighting driver is capable of delivering a maximum output of 500mA volts.To meet the operation criteria, the maximum output current drops to 500mA.As a result, it is mounted in the manner of Surface Mount.The LED driver has 170mOhm resistance.In total, 1 channels are available.A maximum input voltage of 5.5V volts can be applied to it.It requires 2.5V volts as the minimum input voltage.The maximum operating temperature of 85°C°C allows for stable operation.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.There is a maximum voltage of 5.5VV that it can handle.Supply voltages as low as 2.5VV are possible.
MIC2005A-1YM5-TR Features
Resistance of 170mOhm
1 channels
MIC2005A-1YM5-TR Applications
There are a lot of Microchip Technology MIC2005A-1YM5-TR Power Switches ICs applications.
- Hot Swaps
- Wearable Devices
- Notebook PC
- Portable GPS
- Portable GPS Device
- USB Power Distribution
- Portable Devices
- Wireless/Networking Cards
- Hot-Swap Systems
- PDAs