MGM12P02F1024GA-V2
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | Module |
| Manufacturer Package Identifier | MGM12P02F1024GA-V2 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | Mighty Gecko |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Voltage - Supply | 1.8V~3.8V |
| Frequency | 2.4GHz |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 1MB Flash 256kB RAM |
| Data Rate | 2Mbps |
| Utilized IC / Part | EFR32MG12 |
| Bandwidth | 83.5MHz |
| Telecom IC Type | TELECOM CIRCUIT |
| Power - Output | 10dBm |
| RF Family/Standard | 802.15.4, Bluetooth |
| Antenna Type | Integrated, Chip |
| Sensitivity | -101dBm |
| Number of ADC Channels | 1 |
| Serial Interfaces | I2C, SPI, UART |
| Current - Receiving | 10.3mA |
| Current - Transmitting | 10mA |
| Modulation | 2-FSK, 4-FSK, DSSS, GFSK, GMSK, O-QPSK |
| Number of GPIO | 25 |
| Ambient Temperature Range High | 85°C |
| Height | 2.1mm |
| RoHS Status | RoHS Compliant |
MGM12P02F1024GA-V2 Overview
As far as RF Transceiver' mounting is concerned, Surface Mount is adopted.It uses the Cut Tape (CT) package in order to optimize the performance of this RF Transceiver module.-40°C~85°C should be the operating temperature when Transceiver is operating.A RF Transceiver Module, it is a member of the Mighty Gecko family.RF Transceiver is capable of supplying a voltage of 1.8V~3.8V volts.2.4GHz Hz is the frequency at which the Transceiver operates.
MGM12P02F1024GA-V2 Features
Surface Mount
Cut Tape (CT) package
1.8V~3.8V volts
MGM12P02F1024GA-V2 Applications
There are a lot of Silicon Labs MGM12P02F1024GA-V2 RF Transceiver Modules applications.
- Consumer Electronics
- Fitness
- Low-power IoT applications
- Secure Payment
- Transmit
- Chemical Sensors
- Internet Radio
- Patient Asset Tracking
- Power Amplifier (PA)
- Automotive