MDM-9PH003B
| Parameters | |
|---|---|
| Insulation Material | GLASS FILLED DIALLYL PHTHALATE |
| Packaging | Bulk |
| Published | 2006 |
| Series | MDM |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Termination | Crimp |
| Connector Type | D-Sub |
| Type | D-Type, Micro-D |
| Number of Positions | 9 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Color | Multiple, Individual |
| Number of Rows | 2 |
| Gender | Male |
| Additional Feature | NO HARDWARE, STANDARD |
| Subcategory | D Type Connectors |
| Total Number of Contacts | 9 |
| Shell Finish | CADMIUM/YELLOW CHROMATE |
| Contact Finish | Gold |
| Reliability | COMMERCIAL |
| Body Breadth | 0.308 inch |
| Body Depth | 0.23 inch |
| Rated Current (Signal) | 3A |
| Contact Style | Pin |
| Contact Resistance | 8mOhm |
| Insulation Resistance | 5000000000Ohm |
| Mating Contact Pitch | 0.05 inch |
| Max Current Rating | 3A |
| Dielectric Withstanding Voltage | 600VAC V |
| Cable Length | 457mm |
| Wire/Cable Gauge | 26 AWG |
| Contact Pattern | STAGGERED |
| Insertion Force-Max | 2.224 N |
| Mating Contact Row Spacing | 0.1 inch |
| 1st Connector | Receptacle, Male Pins |
| 2nd Connector | Individual Wire Leads |
| Connector Type A | D-Sub, Receptacle |
| Connector Type B | Wire Leads |
| Contact Design | PREASSEM CONN |
| Length | 1.50' 457.20mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 15 Weeks |
| Contact Material | COPPER ALLOY |
See Relate Datesheet