MCZ33291EGR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES SUPPLY 9 TO 26.5V |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Base Part Number | MCZ33291 |
| JESD-30 Code | R-PDSO-G24 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Current - Output (Max) | 500mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 9V~26.5V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 50 μs |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 550m Ω |
| Turn Off Time | 50 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 15.395mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
MCZ33291EGR2 Overview
It is package in Tape & Reel (TR) case.In the 24-SOIC (0.295, 7.50mm Width) package, it is included.This LED driving board is mounted using the mounting type Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.As a default, the output is set to 8.The LED driving board operates with a supply voltage of 4.5V~5.5V.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It belongs to the family MCZ33291.It contains 24 terminations.As far as the lighting driver is concerned, there are 1 functions.In terms of output, the lighting driver can provide a maximum of 500mA V.The Vsup value (maximum supply voltage) is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must be maintained above 4.5V.ALSO OPERATES SUPPLY 9 TO 26.5V can also be produced by using this LED driver.
MCZ33291EGR2 Features
Additional features like ALSO OPERATES SUPPLY 9 TO 26.5V
MCZ33291EGR2 Applications
There are a lot of NXP USA Inc. MCZ33291EGR2 Power Switches ICs applications.
- Mobile Communication Devices
- USB Power Distribution
- USB Power Distribution
- PC Cards
- Low Voltage I/O System Power
- Telecom and Network Systems
- USB3.1 Power Delivery
- Notebook PC
- Handheld Devices
- Hot-Swap Systems