MCP65R46T-2402E/CHY
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP65R46 |
| Pin Count | 6 |
| Output Type | CMOS, Open-Drain, TTL |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 4μA |
| Output Current | 50mA |
| Max Supply Current | 4μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4 μs |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP65R46T-2402E/CHY Overview
In order to facilitate transportation, it is packaged in SOT-23-6 .Output type of this comparator is CMOS, Open-Drain, TTL .Ready for shipping in Tape & Reel (TR) package.There are6 terminals on the comparator.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a General Purpose chip.There are a total of 1 elements in it.The board includes 6 pins.Electronic comparator is recommended that the mounting type be Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.There are 6 pins on the comparator.You can search MCP65R46 if you are looking for more pin-to-pin solutions.There is 4μA current flowing in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires 4μA supply current.A current supply greater than 4μA may result in the comparator malfunctioning.The device can be powered by 2/5V power supplies.There is a maximum current that can be input into the device of 1pA .
MCP65R46T-2402E/CHY Features
CMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 4μA
MCP65R46T-2402E/CHY Applications
There are a lot of Microchip Technology MCP65R46T-2402E/CHY linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Point of load regulators
- Window Comparators
- Consumer Medical Electronics
- Lithium ion battery monitoring
- Body Control Modules
- Self-diagnostics
- Appliances
- RC Timers
- General Purpose Low Voltage Applications