MCP6544T-E/ST
| Parameters | |
|---|---|
| Quiescent Current | 1μA |
| Supply Current-Max | 0.001mA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6544 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 1.6/5.5V |
| Propagation Delay | 8 μs |
MCP6544T-E/ST Overview
The product is packaged in 14-TSSOP (0.173, 4.40mm Width) to facilitate transportation.The comparator has an output type of CMOS, Push-Pull, Rail-to-Rail, TTL .As a result, it is designed with Tape & Reel (TR) package.There are 14 terminals on the comparator.The component belongs to the Comparator family of electrical components.A comparator supplied with 5V voltage can complete many demanding tasks.It's a typical General Purpose comparator.Electronic comparator consists of 4 elements in total.As a result, it contains 14 pins.A Surface Mount mounting type is recommended.In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .There are 14 pins on the comparator.Alternatively, you may search for MCP6544 to find more pin-to-pin solutions for your specific needs.The comparator presents a quiescent current of 1μA volts.There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is sufficient to run the device wElectronic comparatorh 1.6/5.5V power supplies.Electronic comparator is possible to input a maximum of 1pA current into the device.Comparator electronics is possible to supply this part wComparator electronicsh a minimum current of 0.001mA .
MCP6544T-E/ST Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6544T-E/ST Applications
There are a lot of Microchip Technology MCP6544T-E/ST linear comparators applications.
- Metering Systems
- Motor drives
- General-Purpose, Low-Voltage Applications
- Wide Range VCO; MOS Clock Timers
- Current and voltage sensing
- Wireless Base Stations
- System control and monitoring
- High-Speed Sampling Circuits
- Power Supervision
- Lithium ion battery monitoring