MCP6544-E/SL
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6544 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 1.6/5.5V |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Supply Current-Max | 0.001mA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 120 °C/W |
| Height | 1.25mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6544-E/SL Overview
Electronic comparator is packaged in 14-SOIC (0.154, 3.90mm Width) for convenient transportation.There is a comparator of type CMOS, Push-Pull, Rail-to-Rail, TTL output on this device.The part is shipped by Tube .The comparator has a total of 14 terminals.The component belongs to the Comparator family of electrical components.A comparator supplied with 5V voltage can complete many demanding tasks.This is a typical comparator of type General Purpose .Electronic comparator has a total of 4 elements.Electronic comparator has 14 pins.The recommended mounting type is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .Electronic comparator has 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search MCP6544 .As a result, this comparator displays a quiescent current of 1μA .There is a Surface Mount for mounting it on a PCB or other board.In order to run the device, there are only 1.6/5.5V power supplies required.This part can be supplied with a maimum current of 0.001mA .
MCP6544-E/SL Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6544-E/SL Applications
There are a lot of Microchip Technology MCP6544-E/SL linear comparators applications.
- Window Comparators
- General-Purpose Portable Devices
- General Purpose Low Voltage Applications
- Metering Systems
- General-Purpose, Low-Voltage Applications
- Security Detection Systems
- Factory automation & control
- Power management
- Battery management and protection
- Ultra-Low Power Systems