MCP6541-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | General Purpose |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MCP6541 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.6V |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 4 μs |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 8μs |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6541-E/SN Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.A comparator with a CMOS, Push-Pull, Rail-to-Rail, TTL output is used here.The chip is packaged with Tube .A comparator of this type is typically of type General Purpose .A total of 1 elements can be found in it.Electronic comparator is recommended that you mount the device using type Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator has 8 pins.You can find more pin-to-pin solutions by searching MCP6541 .The comparator presents a quiescent current of 1μA volts.The PCB or other board has a Surface Mount for mounting.Electronic comparator is possible to input up to 1pA current into the device.Comparator electronics is not recommended to operate at a temperature higher than 125°C .Comparator electronics will not be able to function at temperatures below -40°C .The maximal supply voltage of the comparator is 5.5V .Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 1.6V .To maintain output quality, 1 channels cooperate.Comparator electronics is necessary to have a voltage of 5V for normal operation.
MCP6541-E/SN Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6541-E/SN Applications
There are a lot of Microchip Technology MCP6541-E/SN linear comparators applications.
- General-Purpose Portable Devices
- Hand-Held Electronics
- Security Detection Systems
- Battery-Powered Electronics
- Infotainment and Clusters
- Zero-Crossing Detectors
- Analog front end
- Automatic Test Equipment
- General Purpose Low Voltage Applications
- Window Comparators