MC9S08AW60CPUE
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | S08 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC9S08AW60 |
| JESD-30 Code | S-PQFP-G64 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Oscillator Type | Internal |
| Number of I/O | 54 |
| Speed | 40MHz |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Peripherals | LVD, POR, PWM, WDT |
| Clock Frequency | 40MHz |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 60KB 60K x 8 |
| Connectivity | I2C, SCI, SPI |
| Bit Size | 8 |
| Data Converter | A/D 16x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | NO |
| ROM (words) | 63280 |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
MC9S08AW60CPUE Description
The MC9S08AW60, MC9S08AW48, MC9S08AW32, and MC9S08AW16 are members of the low-cost, high-performance HCS08 family of 8-bit microcontroller units (MCUs). All MCUs in the family use the enhanced HCS08 core and are available with a variety of modules, memory sizes, memory types, and package types. Refer to Table 1-1 for memory sizes and package types.
MC9S08AW60CPUE Features
? 40-MHz HCS08 CPU (central processor unit)
? 20-MHz internal bus frequency
? HC08 instruction set with added BGND
instruction
? Single-wire background debug mode interface
? Breakpoint capability to allow single breakpoint
setting during in-circuit debugging (plus two
more breakpoints in on-chip debug module)
? On-chip real-time in-circuit emulation (ICE) with
two comparators (plus one in BDM), nine
trigger modes, and on-chip bus capture buffer.
Typically shows approximately 50 instructions
before or after the trigger point.
? Support for up to 32 interrupt/reset sources
Memory Options
? Up to 60 KB of on-chip in-circuit programmable
FLASH memory with block protection and
security options
? Up to 2 KB of on-chip RAM
Clock Source Options
? Clock source options include crystal, resonator,
external clock, or internally generated clock
with precision NVM trimming
System Protection
? Optional computer operating properly (COP)
reset
? Low-voltage detection with reset or interrupt
? Illegal opcode detection with reset
? Illegal address detection with reset (some
devices don’t have illegal addresses)
Power-Saving Modes
? Wait plus two stops
Peripherals
? ADC — Up to 16-channel, 10-bit
analog-to-digital converter with automatic
compare function
? SCI — Two serial communications interface
modules with optional 13-bit break
? SPI — Serial peripheral interface module
MC9S08AW60CPUE Applications
software libraries
motor configuration tools