MC74VHC74DR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74VHC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74VHC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 115MHz |
| Propagation Delay | 15.4 ns |
| Turn On Delay Time | 7.3 ns |
| Family | AHC/VHC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHC74DR2 Overview
As a result, it is packaged as 14-SOIC (0.154, 3.90mm Width). A package named Tape & Reel (TR)includes it. This output is configured with Differential. The trigger configured with it uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 2V~5.5Vis required for its operation. In this case, the operating temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74VHC series. A frequency of 115MHzshould be the maximum output frequency. It consumes 2μA of quiescent There are 14 terminations,The 74VHC74family includes it. Power is provided by a 3.3V supply. Input capacitance of this device is 4pF farads. In this case, the D flip flop belongs to the AHC/VHCfamily. There is an electronic part that is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. Vsup reaches its maximum value at 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 2V. In order to achieve its superior flexibility, 2 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. There are 1 output lines on it.
MC74VHC74DR2 Features
Tape & Reel (TR) package
74VHC series
14 pins
MC74VHC74DR2 Applications
There are a lot of ON Semiconductor MC74VHC74DR2 Flip Flops applications.
- Circuit Design
- Single Up Count-Control Line
- Buffer registers
- Matched Rise and Fall
- Shift registers
- ESD protection
- Memory
- Communications
- ESCC
- Storage Registers