MC74VHC573DWR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74VHC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74VHC573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 5 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHC573DWR2 Overview
20-SOIC (0.295, 7.50mm Width) contains it. Tape & Reel (TR) is the way it is packaged. It uses Tri-State as the output. A D-Type Transparent Latch logic type is used in this electrical device. Electronic components are mounted using the Surface Mount method. With a supply voltage of 2V~5.5V, it operates. It is -40°C~85°C at the operating temperature. This FPGA is part of the 74VHC series. With this electronic part, there are 8 bits. This device has 20 terminations. It belongs to 74VHC573 family. With a supply voltage of 3.3V, it operates. The device is equipped with 20 pins. This electronic device is categorized as a AHC/VHC electronic device. The device has 20 pins. Electronic parts are mounted using the Surface Mount method. This device has 2 ports that can be connected to it. In the subcategory FF/Latches, this part belongs. It reaches 5.5V when the supply voltage (Vsup) reaches maximum. The device is powered by 2/5.5V power supplies. The supply voltage (Vsup) should be greater than 2V. An electronic circuit can be found on 8 input lines. Based on its reliable performance, this device is appropriate for TAPE AND REEL. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
MC74VHC573DWR2 Features
20-SOIC (0.295, 7.50mm Width) package
74VHC series
8 Bits
74VHC573 family
20 pin count
20 pins
2/5.5V power supplies
MC74VHC573DWR2 Applications
There are a lot of ON Semiconductor MC74VHC573DWR2 Latches applications.
- Network Switches
- Timers
- Hammer Device Information
- Digital bus buffer
- Phase comparator
- Hammer
- Motor Drives
- Storage
- Buffer/Storage Registers
- Pattern generators