MC74VHC4066DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 85Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74VHC4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 40μA |
| Power Dissipation | 450mW |
| Throw Configuration | SPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 80 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 4 |
| Supply Type | Single |
| Bandwidth | 160MHz |
| Turn-Off Delay Time | 80 ns |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 30Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 30ns |
| Switch-off Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Normal Position | NO |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHC4066DTR2 Overview
Shipping overseas is convenient with the electronic component packed in 14-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. 1:1 is the ratio between multiplexers and demultiplexers. Temperatures around -55°C~125°C TA are extended for operation. In total, there are 14 terminations. This electronic part offers high-quality output due to its 4 channels. It is safe to turn on and run the electronic component with a 4.5V voltage supply. 14 pins are injected to the electronic part body. A SPST - NO switching circuit is used to build these analog multiplexers. Using the MC74VHC4066 search parameter, you can discover variants of the switch. An switch multiplexer with 85Ohm internal resistance has a value of 85Ohm. Please refer to the datasheets for 14 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 2V. It would be sufficient to run this analogue multiplexer with 40μA current. This analog switch requires a voltage of 2V~12V to drain from a single voltage supply. This analog switch ic utilizes SEPARATE OUTPUT output. Operating the 4 inputs requires 4 inputs. There are 160MHz bandwidths for data transfer.
MC74VHC4066DTR2 Features
4 Channels
Switch Circuit: SPST - NO
40μA Supply Current
Bandwidth: 160MHz
MC74VHC4066DTR2 Applications
There are a lot of ON Semiconductor MC74VHC4066DTR2 Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- High speed data transmission line cards
- Microprocessor Controlled Analog Systems
- Medical
- 65 V DACs
- Power routing
- DVD-R
- Sample-and-hold systems
- Optical Applications
- Audio and video switching