MC74VHC4052DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 51 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 200Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74VHC4052 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 500mW |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 245 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Halogen Free | Halogen Free |
| Supply Type | Dual, Single |
| Bandwidth | 95MHz |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 160 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 80pF |
| On-state Resistance Match-Nom | 18Ohm |
| Switch Circuit | SP4T |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 76ns |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74VHC4052DR2G Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. Mounted in Surface Mount is this multiplexer. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -55°C~125°C TA extended. In total, 16 terminations have occurred. A electrical component with 8 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 4.5V voltage supply. As part of its design, the 16 series is equipped with this electronic component. The analog switch ics are built using SP4T switching circuits. There are 2 circuits in this switch device. Search with MC74VHC4052 if you are looking for analog multiplexer variants. A 200Ohm internal resistance characterizes this multiplexer. To find out what the 16 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. A cost-effective Dual, Single supply type analogue multiplexer. 2V is the lowest voltage that should be fed to the electronic electronic part. For this switch, a dual supply voltage is feasible, but it must not exceed 6VA dual power supply should have at least 1V voltage attached. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. Operating 8 inputs is required. 95MHz-bandwidths can be used to transfer data between multiplexers.
MC74VHC4052DR2G Features
8 Channels
Switch Circuit: SP4T
Bandwidth: 95MHz
MC74VHC4052DR2G Applications
There are a lot of ON Semiconductor MC74VHC4052DR2G Analog Switches & Multiplexers ICs applications.
- Remote wireless modules
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- DSLAMs
- Optical Applications
- E1 Network Equipment
- FTTH
- Multi-Line E1 Interface Cards
- Sample hold systems
- Video signal routing
- Automotive applications