MC74VHC374DWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74VHC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 120MHz |
| Propagation Delay | 16.2 ns |
| Turn On Delay Time | 5.4 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74VHC374DWR2G Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). The package Tape & Reel (TR)contains it. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with the trigger Positive Edge. Surface Mountmounts this electrical part. A voltage of 2V~5.5Vis used as the supply voltage. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74VHCseries of FPGAs. It should not exceed 120MHzin its output frequency. The element count is 1 . There is a consumption of 4μAof quiescent energy. Currently, there are 20 terminations. This D latch belongs to the family of 74VHC374. The power source is powered by 3.3V. The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. A device of this type belongs to the family of AHC/VHC. It is mounted in the way of Surface Mount. 20pins are included in its design. This device has Positive Edgeas its clock edge trigger type. It is part of the FF/Latchesbase part number family. This flip flop is designed with 8 Bits. There is a 5.5Vmaximum supply voltage (Vsup). The supply voltage (Vsup) should be maintained above 2V for normal operation. The superior flexibility of this product is achieved by using 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. It runs on 2/5.5Vvolts of power. A total of 2ports are embedded in the D flip flop. There are 3 output lines in this JK flip flop.
MC74VHC374DWR2G Features
Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
2/5.5V power supplies
MC74VHC374DWR2G Applications
There are a lot of ON Semiconductor MC74VHC374DWR2G Flip Flops applications.
- Automotive
- Supports Live Insertion
- Control circuits
- Shift Registers
- EMI reduction circuitry
- ESD protection
- Reduced system switching noise
- Safety Clamp
- Event Detectors
- Differential Individual