MC74VHC1G66DFT1G
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 40Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 150mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74VHC1G66 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 25mA |
| Power Dissipation | 150mW |
| Max Supply Current | 25mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 40 ns |
| Number of Inputs | 1 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 180MHz |
| Turn-Off Delay Time | 40 ns |
| On-State Resistance (Max) | 40Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| Switch Circuit | SPST - NO |
| Switching | MAKE-BEFORE-BREAK |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NO |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74VHC1G66DFT1G Overview
Presented in 5-TSSOP, SC-70-5, SOT-353, this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 1:1. Operational temperature extended around -55°C~125°C TA. In total, there are 5 terminations. By its 1 channels, the electronic component provides high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 5 series. The analog switch ics are built using SPST - NO switching circuits. Use MC74VHC1G66 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 40Ohm. The datasheets for the 5 pins explain the functions. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. The lowest voltage the electronic part should receive is 2V. The analogue multiplexer could operate on 1μA current. This analog switch requires a voltage of 2V~5.5V to drain from a single voltage supply. If put voltage greater than 25mA on the device, damage may be caused to the analogue multiplexer. 5V operating voltages are supported by the electronic component. Operating 1 inputs is required. A 180MHz-bandwidth can be used for data transfer.
MC74VHC1G66DFT1G Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
Bandwidth: 180MHz
MC74VHC1G66DFT1G Applications
There are a lot of ON Semiconductor MC74VHC1G66DFT1G Analog Switches & Multiplexers ICs applications.
- SDH
- Industrial control systems
- Medical systems
- Audio and video routing
- DSLAMs
- Signal routing between systems
- High-Voltage
- CSU
- USB 1.1 signal switching circuits
- Avionics and Military Systems