| Parameters |
| Factory Lead Time |
35 Weeks |
| Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
| Mounting Type |
Surface Mount |
| Package / Case |
16-SOIC (0.154, 3.90mm Width) |
| Surface Mount |
YES |
| Number of Pins |
16 |
| Operating Temperature |
-55°C~85°C TA |
| Packaging |
Tube |
| Published |
2006 |
| JESD-609 Code |
e3 |
| Pbfree Code |
yes |
| Part Status |
Active |
| Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
| Number of Terminations |
16 |
| Resistance |
40Ohm |
| Terminal Finish |
Tin (Sn) |
| Subcategory |
Multiplexer or Switches |
| Max Power Dissipation |
500mW |
| Technology |
CMOS |
| Terminal Position |
DUAL |
| Terminal Form |
GULL WING |
| Peak Reflow Temperature (Cel) |
260 |
| Number of Functions |
1 |
| Supply Voltage |
3V |
| Time@Peak Reflow Temperature-Max (s) |
40 |
| Base Part Number |
MC74LVXT8051 |
| Pin Count |
16 |
| Number of Channels |
8 |
| Number of Circuits |
1 |
| Max Supply Voltage |
6V |
| Min Supply Voltage |
2V |
| Operating Supply Current |
40μA |
| Nominal Supply Current |
4μA |
| Power Dissipation |
500mW |
| Propagation Delay |
4 ns |
| Turn On Delay Time |
20 ns |
| Logic Function |
Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs |
8 |
| Halogen Free |
Halogen Free |
| Supply Type |
Single |
| Bandwidth |
80MHz |
| Turn-Off Delay Time |
30 ns |
| On-State Resistance (Max) |
25Ohm |
| Multiplexer/Demultiplexer Circuit |
8:1 |
| Off-state Isolation-Nom |
37 dB |
| Current - Leakage (IS(off)) (Max) |
100nA |
| Channel Capacitance (CS(off), CD(off)) |
10pF |
| On-state Resistance Match-Nom |
25Ohm |
| Channel-to-Channel Matching (ΔRon) |
8 Ω |
| Crosstalk |
-60dB @ 1MHz |
| Voltage - Supply, Single (V+) |
2V~6V |
| Signal Current-Max |
0.02A |
| Height |
1.5mm |
| Length |
10mm |
| Width |
4mm |
| Radiation Hardening |
No |
| REACH SVHC |
No SVHC |
| RoHS Status |
ROHS3 Compliant |
| Lead Free |
Lead Free |
MC74LVXT8051DG Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -55°C~85°C TA. There are 16 terminations totally. A high-quality output is provided by the electrical component's 8 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. The electronic part body is injected with 16 pins. 1 circuits are used in this analogue multiplexer. MC74LVXT8051 can be used to search for analog multiplexer variants. A 40Ohm internal resistance characterizes this multiplexer. The functions of 16 pins can be found in the datasheets. Theswitch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 6V. Digital switch that provides Single power at a cost-effective price. A low voltage of 2V should be applied to the electronic component. The analogue multiplexer could operate on 40μA current. A voltage of 2V~6V is required for this switch device, which drains from a single voltage source. The electrical component supports 8 inputs. This switch operates within the bandwidth of 80MHz.
MC74LVXT8051DG Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT8051DG Applications
There are a lot of ON Semiconductor MC74LVXT8051DG Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Central office
- Digital Cross-Connects
- Wireless Local Loop
- Digital cross connects (DSX-1)
- Audio/video switches
- Microprocessor controlled systems
- E1 Multiplexer
- E1 Network Equipment
- High speed data transmission line cards