MC74LVXT4053D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC74LVXT4053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Throw Configuration | DPST |
| Propagation Delay | 23 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±6V |
| Supply Type | Dual |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SPDT |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 28ns |
| Switch-off Time-Max | 28ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVXT4053D Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Operation at a temperature around -55°C~125°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 2 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. Multiplexers built on a SPDT switching circuit are built. The multiplexer consists of 3 circuits. Try searching with MC74LVXT4053 if you're looking for variants. In this multiplexer, the internal resistance is 55Ohm. Datasheets for 16 pin functions are available upon request. A analogue multiplexer of this type is a Multiplexer or Switches. Analogue multiplexers of the Dual supply type that are cost-effective. This multiplexer would work with 40μA current. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. A voltage of 6V can be used to operate the electronic component. This switch operates within the bandwidth of 80MHz.
MC74LVXT4053D Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT4053D Applications
There are a lot of ON Semiconductor MC74LVXT4053D Analog Switches & Multiplexers ICs applications.
- Remote wireless modules
- Communications systems
- High reliability control systems
- 65 V DACs
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Multi-Line E1 Interface Cards
- HDTV
- Cross Connects
- Digital cross connects (DSX-1)
- Cable PC