MC74LVX8051DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 45 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVX8051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 40μA |
| Power Dissipation | 450mW |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Voltage - Supply, Single (V+) | 2.5V~6V |
| Signal Current-Max | 0.02A |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVX8051DTR2G Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. Operational temperature extended around -55°C~85°C TA. 16 terminations have been made so far. The electronic part delivers high-quality output through its 8 channels. An 3V voltage supply should allow the electrical part to be turned on and run. The electrical component body receives 16 pins. It consists of 1 circuits. Try searching for the analog switch ic with MC74LVX8051 if you are looking for variants. A 30Ohm internal resistance characterizes this multiplexer. You can find the functions of the 16 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. Analogue multiplexers of the Single supply type that are cost-effective. 2.5V is the lowest voltage the electrical component should receive. For this digital switch to work, 40μA current would suffice. This analog switch requires a voltage of 2.5V~6V to drain from a single voltage supply. Among the inputs that can be operated are the 8 inputs. 80MHz-bandwidths can be used to transfer data between multiplexers.
MC74LVX8051DTR2G Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVX8051DTR2G Applications
There are a lot of ON Semiconductor MC74LVX8051DTR2G Analog Switches & Multiplexers ICs applications.
- Central office
- PBXs
- Cell phones
- Microprocessor controlled systems
- Audio signal routing
- Public switching systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- CSU
- Digital access cross connects
- Residential Gateways, Home Gateway/Router