MC74LCX374MEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Propagation Delay (tpd) | 9.5 ns |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | ROHS3 Compliant |
MC74LCX374MEL Overview
20-SOIC (0.209, 5.30mm Width)is the packaging method. Package Tape & Reel (TR)embeds it. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. Powered by a 2V~3.6Vvolt supply, it operates as follows. In this case, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74LCXseries of FPGAs. There should be no greater frequency than 150MHzon its output. A total of 1elements are contained within it. This process consumes 10μA quiescents. 20terminations have occurred. A voltage of 3.3V is used to power it. The input capacitance of this JK flip flopis 7pF farads. An electronic device belonging to the family LVC/LCX/Zcan be found here. Vsup reaches its maximum value at 3.6V. Normally, the supply voltage (Vsup) should be above 2V. The flip flop contains 2ports.
MC74LCX374MEL Features
Tape & Reel (TR) package
74LCX series
MC74LCX374MEL Applications
There are a lot of Rochester Electronics, LLC MC74LCX374MEL Flip Flops applications.
- Memory
- Storage Registers
- Count Modes
- Supports Live Insertion
- Shift Registers
- Power down protection
- Bus hold
- Buffered Clock
- Patented noise
- Differential Individual