MC74LCX374DWR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74LCX |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LCX16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LCX374DWR2 Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). A package named Tape & Reel (TR)includes it. T flip flop is configured with an output of Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A voltage of 2V~3.6Vis required for its operation. A temperature of -40°C~85°C TAis used in the operation. D-Typedescribes this flip flop. It belongs to the 74LCXseries of FPGAs. You should not exceed 150MHzin the output frequency of the device. There are 1 elements in it. T flip flop consumes 10μA quiescent energy. 20terminations have occurred. The 74LCX16374 family contains this object. Power is provided by a 3.3V supply. Its input capacitance is 7pF farads. In terms of electronic devices, this device belongs to the LVC/LCX/Zfamily of devices. There is an electronic part mounted in the way of Surface Mount. 20pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. It is designed with 8bits. The supply voltage (Vsup) should be maintained above 2V for normal operation. 8 circuits are used to achieve its superior flexibility. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. The D flip flop is embedded with 2ports. If high efficiency is to be achieved, the supply voltage should be maintained at 3.3V. There are 3 output lines in this JK flip flop.
MC74LCX374DWR2 Features
Tape & Reel (TR) package
74LCX series
20 pins
8 Bits
MC74LCX374DWR2 Applications
There are a lot of ON Semiconductor MC74LCX374DWR2 Flip Flops applications.
- Balanced 24 mA output drivers
- Set-reset capability
- Asynchronous counter
- Shift Registers
- Latch-up performance
- ESD protection
- CMOS Process
- Test & Measurement
- Bounce elimination switch
- ESCC