MC74LCX16374DTG
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Current Rating | 24μA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 16 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Clock Frequency | 170MHz |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 6.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 170000000Hz |
| Height | 939.8μm |
| Length | 12.5984mm |
| Width | 6.1976mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LCX16374DTG Overview
As a result, it is packaged as 48-TFSOP (0.240, 6.10mm Width). Package Tubeembeds it. T flip flop is configured with an output of Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 2V~3.6V volts. In the operating environment, the temperature is -55°C~125°C TA. The type of this D latch is D-Type. This type of FPGA is a part of the 74LCX series. You should not exceed 170MHzin the output frequency of the device. A total of 2 elements are present. This process consumes 10μA quiescents. It has been determined that there have been 48 terminations. D latch belongs to the 74LCX16374 family. It is powered from a supply voltage of 2.5V. This T flip flop has a capacitance of 7pF farads at the input. A device of this type belongs to the family of LVC/LCX/Z. A part of the electronic system is mounted in the way of Surface Mount. A total of 48pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. This part is included in FF/Latches. A normal operating voltage (Vsup) should remain above 2V. 16 circuits are used to achieve its superior flexibility. Considering its reliability, this T flip flop is well suited for RAIL. A D flip flop with 2embedded ports is available. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. It has 3 output lines to operate.
MC74LCX16374DTG Features
Tube package
74LCX series
48 pins
MC74LCX16374DTG Applications
There are a lot of ON Semiconductor MC74LCX16374DTG Flip Flops applications.
- Shift registers
- Differential Individual
- Frequency division
- Buffer registers
- Memory
- Cold spare funcion
- QML qualified product
- Storage registers
- Instrumentation
- Asynchronous counter