MC74HCT273ANG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Function | Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 30MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 25ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| RoHS Status | ROHS3 Compliant |
MC74HCT273ANG Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). It is included in the package Tube. T flip flop is configured with an output of Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Through Hole. A supply voltage of 4.5V~5.5V is required for operation. In this case, the operating temperature is -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. Its output frequency should not exceed 30MHz. A total of 1elements are present in it. T flip flop consumes 4μA quiescent energy.
MC74HCT273ANG Features
Tube package
74HCT series
MC74HCT273ANG Applications
There are a lot of Rochester Electronics, LLC MC74HCT273ANG Flip Flops applications.
- ESD performance
- ESD protection
- Latch-up performance
- Power down protection
- Parallel data storage
- Pattern generators
- Divide a clock signal by 2 or 4
- ATE
- Frequency Divider circuits
- Single Up Count-Control Line