MC74HC74ANG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 35MHz |
| Propagation Delay | 100 ns |
| Turn On Delay Time | 17 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 17ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 4.953mm |
| Length | 19.685mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74HC74ANG Overview
In the form of 14-DIP (0.300, 7.62mm), it has been packaged. A package named Tubeincludes it. The output it is configured with uses Differential. It is configured with the trigger Positive Edge. Through Holeis positioned in the way of this electronic part. Powered by a 2V~6Vvolt supply, it operates as follows. In this case, the operating temperature is -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. The 74HCseries comprises this type of FPGA. Its output frequency should not exceed 35MHz. This process consumes 2μA quiescents. Currently, there are 14 terminations. The object belongs to the 74HC74 family. An input voltage of 3Vpowers the D latch. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. HC/UHis the family of this D flip flop. Electronic part Through Holeis mounted in the way. With its 14pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. It reaches the maximum supply voltage (Vsup) at 6V. Normally, the supply voltage (Vsup) should be kept above 2V. The superior flexibility is achieved through the use of 2 circuits. Considering its reliability, this T flip flop is well suited for RAIL. The output current of 5.2mA makes it feature maximum design flexibility. In order for the chip to function, it has 1output lines.
MC74HC74ANG Features
Tube package
74HC series
14 pins
MC74HC74ANG Applications
There are a lot of ON Semiconductor MC74HC74ANG Flip Flops applications.
- ESD performance
- Convert a momentary switch to a toggle switch
- Frequency division
- Pattern generators
- Asynchronous counter
- Registers
- Single Up Count-Control Line
- Memory
- Differential Individual
- Data storage