MC74HC595ADTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Propagation Delay | 24 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 3 |
| Count Direction | RIGHT |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC595ADTR2 Overview
Embedded in a package of type 16-TSSOP (0.173, 4.40mm Width), the device is available for use. A total of 16 terminations can be found on the chip. Tape & Reel (TR) is the case in which it is packed. Its operating supply voltage is rated at 3V. The part consists of 1 elements. 16 pins are present on the device. As a general recommendation, mounting by Surface Mount is recommended. Electronic components fall under the category of HC/UH. As you can see, this component is mounted in the way of Surface Mount. It is important to note that the operating temperature range is -55°C~125°C. There is a voltage supply within 2V~6V. In the 74HC series, this electrical component is found. Similar parts can be found by searching for the 74HC595 family. There must be a minimum supply voltage (Vsup) of 2V for this part. The device has 3 input lines. 6V Vsup is the maximum supply voltage (Vsup) for this part. In this device, there are 2 circuits.
MC74HC595ADTR2 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
MC74HC595ADTR2 Applications
There are a lot of ON Semiconductor MC74HC595ADTR2 Shift Registers applications.
- Remote control holding register
- Pseudo Random Pattern Generator
- Parallel data
- data manipulation
- data transfer
- Delay Line
- store data in digital form
- Generate time delay toward digital circuits
- Sequence generator
- Serial-to-parallel data conversion