MC74HC595ADTG
| Parameters | |
|---|---|
| Factory Lead Time | 17 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 35MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Propagation Delay | 225 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 225 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Halogen Free | Halogen Free |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 3 |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC595ADTG Overview
16-TSSOP (0.173, 4.40mm Width) is the package in which the device is embedded. There are 16 terminations on the chip. This item is packed in case Tube. The part's operating supply voltage is rated 3V. 1 elements make up this part. It has 16 pins. It is recommended to mount by Surface Mount. There is an electronic component in the HC/UH. There is a component mounted in the way of Surface Mount on this board. Operating temperatures are within the range of -55°C~125°C. There is a votage of 2V~6V provided with it. In this case, the electrical component belongs to the series 74HC. A 74HC595 family can be used to search for similar parts. For this part, the minimum supply voltage (Vsup) should not be less than 2V. The device has 3 input lines. Ideally, the maximum supply voltage (Vsup) should not exceed 6V. There is a quiescent current of 4μA running through it. This device contains 2 circuits. 35MHz is the frequency of the device.
MC74HC595ADTG Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Quiescent Current at 4μA
MC74HC595ADTG Applications
There are a lot of ON Semiconductor MC74HC595ADTG Shift Registers applications.
- Pattern Recognizers
- Data Processors
- Counter
- Remote control holding register
- Serial-to-parallel data conversion
- ROM Chips
- 8-bit data storage
- Parallel to serial converter
- Serial to parallel converter
- Interconnectors