MC74HC595ADG
| Parameters | |
|---|---|
| Factory Lead Time | 23 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 35MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Number of Outputs | 9 |
| Output Type | Tri-State |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 1 |
| Propagation Delay | 38 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 225 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Halogen Free | Halogen Free |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Input Current | 1μA |
| Number of Output Lines | 3 |
| fmax-Min | 24 MHz |
| Ambient Temperature Range High | 125°C |
| Height | 1.75mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC595ADG Overview
This device can be found embedded within the package 16-SOIC (0.154, 3.90mm Width). A total of 16 terminations can be found on the chip. Presented in a case of Tube. There is 3V operating supply voltage listed on the part. 16 pins are provided on the device. Using Surface Mount as a mount point is recommended. In this case, the electronic component belongs to the HC/UH. There is a component mounted in the way of Surface Mount on this board. It is important to note that the operating temperature range is -55°C~125°C. Votage is provided within 2V~6V. In this case, the electrical component belongs to the series 74HC. Similar parts can be found by searching for the 74HC595 family. For this part, Vsup should not be less than 2V. There is a capability to deliver voltage at 2/6V. It should not exceed 6V in terms of the supply voltage (Vsup). It is necessary to operate 3 output lines of the system. There is a quiescent current of 4μA running through it. In this device, there are 1 circuits that are active at the same time. Its frequency is set to 35MHz. It is equipped with 9 outputs.
MC74HC595ADG Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
It supplies 2/6V power
With 3 output lines
Quiescent Current at 4μA
MC74HC595ADG Applications
There are a lot of ON Semiconductor MC74HC595ADG Shift Registers applications.
- Pseudo Random Pattern Generator
- Data Format Converters
- Data Processors
- Remote control holding register
- Dual-rank shift, hold, and bus applications
- Parallel to serial converter
- Serial-to-parallel data conversion
- Counter
- Parallel data
- Generate time delay toward digital circuits